Editor In Chief

Estimate the total generator load in watts by combining running wattage of appliances, surge allowance for motor starting, demand diversity, and a recommended safety margin.

Estimate the recommended generator size in kilowatts for a whole-house backup system based on home size, HVAC load, electric appliance count, desired backup coverage, and startup surge allowance.

Estimate the generator energy capacity needed in kWh based on total running load, surge factor, runtime, and desired reserve margin.

Estimate the recommended generator size in watts for your home based on running load, starting surge, backup duration, and a reserve margin for future or unexpected loads.

Estimate the generator wattage needed by adding the running watts of your appliances, accounting for additional startup surge, and applying a safety margin for reliable operation.

Estimate the generator size you need in running watts based on the total running wattage of your appliances, the largest motor startup surge, desired reserve capacity, fuel type efficiency, and altitude adjustment.

Estimate the recommended generator size in running watts by totaling appliance loads, startup surge, and a safety margin. Use this to size a portable or standby generator for home, jobsite, or RV power needs.

Estimate the recommended generator capacity in watts based on the number of essential appliances, their average running wattage, startup surge, and desired backup hours.

Estimate the recommended generator size in kilowatts based on total running load, largest motor starting surge, desired load headroom, fuel type derating, and site altitude.

Estimate the recommended generator size in kilowatts based on total running wattage, starting surge wattage, desired safety margin, and power factor.

Calculate generator alternator efficiency based on electrical output power and mechanical input power, with optional adjustment for power factor when deriving real output from apparent power.

Estimate carbon dioxide emissions from operating a generator based on power output, runtime, load factor, fuel type, and generator efficiency. The calculation estimates fuel use from electrical output and converts it to CO2 emissions using typical fuel-specific emission factors.

Estimate carbon dioxide emissions from a diesel generator based on generator load, operating hours, fuel consumption rate, and diesel emission factor.

Estimate carbon dioxide emissions from a propane generator based on power output, load, runtime, and generator efficiency. The calculation uses an estimated propane consumption rate derived from generator size and load, then converts fuel use to CO2 emissions.

Estimate carbon dioxide emissions from a natural gas generator based on generator size, load level, operating time, and fuel energy content. The calculation approximates electrical output adjusted by load and converts energy use to CO2 using a natural gas emission factor.

Estimate sound level at a given distance from a generator using the inverse square law, with optional environment and barrier adjustments. Enter the generator’s rated noise level at a reference distance, then adjust for your actual listening distance and site conditions.

Estimate the sound level from a generator at a different distance using the inverse square law for sound propagation. Enter the generator’s rated noise level, the reference measurement distance, the new distance, and optional environment and barrier adjustments.

Estimate the total usable power output when running multiple generators in parallel, accounting for each generator’s rated capacity, quantity, derating for environmental/load conditions, and synchronization efficiency.

Estimate the total usable capacity of generators operating in parallel, adjusted for load sharing efficiency, power factor, and a reserve margin for reliable operation.

Estimate the total installed generator capacity required to support a critical load with a chosen redundancy standard, reserve margin, and generator derating factor.